Summer’s finally here, and it’s time to dive into the fun! If you are among the very lucky few in Staten Island with a pool, then surely you shall already be envisioning the long summer days of laziness by the water. However, before you get started on all the fun, there is one thing you have to think about, and that is your pool’s floating liner.
A good liner will not only keep your pool looking fresh but also extend its years of service. So, let’s delve through everything you need to know about pool floating liner installation in Staten Island.
Why Does Your Pool Need a Floating Liner?
A pool liner serves several purposes. It provides a very smooth surface for the pool, thereby making it comfortable to lie on while swimming. More importantly, it protects the pool structure from any damage caused by the chemicals, sunrays, etc., to which it is exposed, and also protects the physical wearing out of the structure. With a proper liner, your pool could avoid wet patches, leaks, cracks, and many other expensive problems.
Choosing the Right Pool Floating Liner
There are many varieties of liners, but vinyl is still the most used. They are flexible and hard-wearing and also come in various designs and colors that will beautifully blend into your taste. Some of the things you should consider in selecting a liner include:
Thickness – They come in different thicknesses measured in millimeters. Another way to say that would be the liner’s thickness, which determines how long it is going to last or puncture resistance.
Pattern and Color – Pick a style that would complement your pool area. Lighter colors give the impression of a larger and clean-looking pool, whereas the dark shades have a classier characteristic associated with them.
Warranty – You should also think about your warranty. A good liner should come with a reasonable guarantee that it would cover defects and installation issues.
Preparation for Installation
Before the installation of a new pool floating liner in Staten Island, you will need to get your pool ready. This will include draining the pool, removing the old liner, and cleaning the pool surface. Below is a step-by-step guide to getting your pool ready:
Drain the Pool— The water will be drained using a submersible pump. Make sure it is pointed towards an appropriate drainage area.
Remove Old Liner– After that, carefully cut the old liner and remove it. It should not pierce or rip the walls or the floor of the pool.
Clean the Pool— Cleaning the surface of a pool removes debris, algae, and mineral deposits. A clean surface also allows the new liner to stick well.
Installing the New Liner
Once your pool is prepped, it’s time to install your new liner. Patience and precision are required while installing a new liner. Here is how you can do it:
Unfold the Liner – Lay the liner out in direct sunlight in the sun for some hours. It gives ease of handling and greater flexibility to the liner.
Position the Liner—Place the liner into the middle of the pool first, then work your way out from there to ensure it is evenly laid and has no wrinkles.
Fasten the Liner—The liners at the top edge of your pool should be attached by coping strips or bead receivers. That way, they will be well-fixed and won’t slip.
Iron Out Wrinkles— Use a soft brush to iron out any wrinkles or air pockets to the best of your ability.
Fill the Pool— You can now start filling your pool with water. As the water rises, continue ironing out the wrinkles so that your liner fits perfectly.
Maintaining Your Pool Liner
Once your new liner is in place, proper maintenance will ensure its enduring existence. Below are some tips on how to best care for your liner.
Regular Cleaning – Clean the pool regularly to remove leaves and other floating debris from its surface and vacuum its bottom. Gentle, less abrasive cleaners do not damage the liner.
Water Chemistry— Keep the water chemistry in balance. High amounts of chlorine or an incorrect pH level will make the liner deteriorate much faster. Test each week and correct as needed.
Prevent Tears – Use caution when handling sharp objects near the pool. Tell bathers not to wear sharp jewelry or have toys that are known to puncture the liner.
Cover the Pool– Use a pool cover when the pool is not in use. It helps protect the liner from UV damage and keeps debris out of the water.
The Benefits of a Well-Installed Pool Floating Liner
Installation of a pool floating liner in Staten Island not only looks grand but also increases the finesse of swimming. Lines provide a smooth surface that is friendly to the feet and keeps the pool water inside and not seeping out because of any possible leaks. Besides, a new liner really brings out a new look in an older pool and makes it much more friendly for family and friends gatherings.
Having a pool floating liner installation in Staten Island may seem odd. Still, once you get down to preparing and learning to do things correctly, it isn’t. Just remember to choose the correct liner, prepare your pool, and follow a smooth installation. If it feels too much for you to handle, professional help is always a call away.
So, get ready to endure those scorching summers on Staten Island with a fresh, inviting pool that’s primed for all the fun and sunbathing you can handle!